| Library | Waveform | Filename | add | Description | info | Channels | Duration | ShortID | Category | Subcategory | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 
|
 |
Ratchets-MetalDYLAFishin_33.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, Medium-Slow | i |
2.0 | 0:03 | Construction |
Ratchet Tool |
||
| 2 |
|
 |
Ratchets-MetalFishingRee_23.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks, Clicks, And Rattles, V Slow | i |
2.0 | 0:05 | Construction | Ratchet Tool | ||
| 3 | 
|
 |
EFX INT Wipe,Snips 01.wav | Tool: Tools, Interior, Snipping, Cutting Wires With Wire Cutter, Mono | i |
1.0 | 0:54 | Construction | Tool | ||
| 4 |
|
 |
Tools-HandHeld-HedgeShea_20.wav | Tools - Hand Held - Hedge Shears - CU - Big Opening And Hard Close W Clack, Various | i |
2.0 | 0:02 | Construction | Hedge Clippers | ||
| 5 |
|
 |
Ratchets-MiscellaneousRat_2.wav | Ratchets - Miscellaneous Ratchets - Ratchet Movement - Int - CU - Constant, Fast | i |
2.0 | 0:05 | Construction | Ratchet Tool | ||
| 6 |
|
 |
EFX INT Trailer Wench 01.wav | Tool: Tool, Interior, Ratchet Winch Clicks, Sweetener For Multi Barrel Gatling Gun | i |
2.0 | 0:05 | Construction | Ratchet Tool | ||
| 7 |
|
 |
Tools-MetalScissors-Int-_20.wav | Tools - Metal Scissors - Int - CU - Hard Close And Open Of Blades | i |
1.0 | 0:01 | Construction | Scissors | ||
| 8 |
|
 |
Tools-HandTools-SledgeHa_13.wav | Tools - Hand Tools - Sledge Hammer - Int - CU - Hit To Concrete Or Cement W Out Roll Off | i |
2.0 | 0:01 | Construction | Hammer Sledge Hammer | ||
| 9 |
|
 |
Ratchets-PlasticDAMQuickF_6.wav | Ratchets - Plastic DAM Quick Fishing Reel - CU - High Pitched Reeling, Spinning, And Clicking, Slow | i |
2.0 | 0:10 | Construction | Ratchet Tool | ||
| 10 | 
|
 |
BridgeConstruct.BBC.EC16Rh.wav | Construction, Bridge: Driving Piles Into River Bed With Pile Hammers. (Construction Of London Bridge, 1969) | i |
2.0 | 1:22 | Construction | Construction Bridge | ||
| 11 |
|
 |
Tools-MetalTools-Int-Clo_17.wav | Tools - Metal Tools - Int - Close-Up - Medium Loud Impacts, Lots Of Scraping, High-Pitched | i |
1.0 | 0:01 | Construction | Tool | ||
| 12 |
|
 |
Tools-HedgeClippers-CU-M_11.wav | Tools - Hedge Clippers - CU - Medium-Fast Snips W Random Pace | i |
2.0 | 0:05 | Construction | Hedge Clippers | ||
| 13 |
|
 |
Nails.BBC.ECD43d.wav | Construction, Nail: Nail Pulled. | i |
2.0 | 0:07 | Construction | Construction Nail | ||
| 14 |
|
 |
Tools-NailAirGun-Close-U_20.wav | Tools - Nail Air Gun - Close-Up - Pneumatic, Single Thudding Click With Air Hiss Burst | i |
2.0 | 0:01 | Construction | Nail Gun | ||
| 15 |
|
 |
Tools-2PointedMetalBladeS_6.wav | Tools - 2 Pointed Metal Blade Scissors - CU - Snips Without Pressure On Blades, Fast | i |
2.0 | 0:04 | Construction | Scissors | ||
| 16 |
|
 |
Tools-Air-PoweredScrewdri_7.wav | Tools - Air-Powered Screwdriver - Int - CU - Fast Drilling, Steady, Short Spurt @ Tail W High Pitched Whirring Noise | i |
2.0 | 0:07 | Construction | Screwdriver Air Powered | ||
| 17 |
|
 |
Tools-AutoMechanicsServic_2.wav | Tools - Auto Mechanics Service Station Activity - Int - Doors Open - Pneumatic Air Wrench, Air Compressor Motors, Tire Changing Machine, Wrenches, Metal Clinks, Clanks And Taps | i |
2.0 | 0:08 | Construction | Tool | ||
| 18 |
|
 |
Ratchets-LargeRatchet-Dul_8.wav | Ratchets - Large Ratchet - Dull Ratchet - Int - CU - Slow Turns Twists | i |
2.0 | 0:01 | Construction | Ratchet Tool | ||
| 19 |
|
 |
Tools-PaintBrush-Int-CU-W_6.wav | Tools - Paint Brush - Int - CU - Wet Cloth Splat | i |
2.0 | 0:05 | Construction | Paint Brush | ||
| 20 |
|
 |
Ratchets-LargeRatchets-M_39.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Metal Groan And Moan | i |
2.0 | 0:06 | Construction | Ratchet Tool | ||
| 21 |
|
 |
Tools-ShovelDigsInDirt-CU-M.wav | Tools - Shovel Digs In Dirt - C U - Multiple People Digging Simultaneously, Very Clean, With No Dirt Slides | i |
2.0 | 0:18 | Construction | Shovel | ||
| 22 |
|
 |
Ratchets-MediumRatchets-M_7.wav | Ratchets - Medium Ratchets - Metal Cable Winch - Int - CU - Continuous Turn In A Single Direction | i |
2.0 | 0:09 | Construction | Ratchet Tool | ||
| 23 |
|
 |
Tools-Air-PoweredScrewdri_2.wav | Tools - Air-Powered Screwdriver - Int - CU - Fast Drilling, Steady | i |
2.0 | 0:06 | Construction | Screwdriver Air Powered | ||
| 24 |
|
 |
Tools-AutoMechanicsServi_17.wav | Tools - Auto Mechanics Service Station Activity - Int - Doors Open - Pneumatic Air Wrench, Air Compressor Motors, Tire Changing Machine, Some Metal Clinks, Clanks And Taps | i |
2.0 | 0:15 | Construction | Tool | ||
| 25 |
|
 |
Ratchets-LargeRatchet-Dul_3.wav | Ratchets - Large Ratchet - Dull Ratchet - Int - CU - Slow Turns Twists | i |
2.0 | 0:03 | Construction | Ratchet Tool | ||
| 26 |
|
 |
Tools-PaintBrush-Int-CU-W_1.wav | Tools - Paint Brush - Int - CU - Wet Gurgling Squishes | i |
2.0 | 0:29 | Construction | Paint Brush | ||
| 27 |
|
 |
Ratchets-LargeRatchets-M_34.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Metal Groan And Moan | i |
2.0 | 0:06 | Construction | Ratchet Tool | ||
| 28 |
|
 |
Tools-ShovelDigsInDirt-CU_1.wav | Tools - Shovel Digs In Dirt - C U - Multiple People Digging Simultaneously, Very Clean, With No Dirt Slides | i |
1.0 | 0:18 | Construction | Shovel | ||
| 29 |
|
 |
Ratchets-MediumRatchets-M_2.wav | Ratchets - Medium Ratchets - Metal Cable Winch - Int - CU - Continuous Turn In A Single Direction | i |
2.0 | 0:07 | Construction | Ratchet Tool | ||
| 30 |
|
 |
Ratchets-MetalDYLAFishin_28.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, Slow | i |
2.0 | 0:05 | Construction | Ratchet Tool | ||
| 31 |
|
 |
Ratchets-MetalFishingRee_18.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks And Clicks, Slow | i |
2.0 | 0:09 | Construction | Ratchet Tool | ||
| 32 |
|
 |
EFX EXT Tool Jingle 02.wav | Tool: Tools, Exterior, Tools Jingling, Metal Handles, Like Walking With Tool Belt | i |
2.0 | 0:19 | Construction | Tool | ||
| 33 |
|
 |
Tools-HandHeld-HedgeShea_15.wav | Tools - Hand Held - Hedge Shears - MCU - Big Opening And Hard Close W Clack, Various | i |
2.0 | 0:03 | Construction | Hedge Clippers | ||
| 34 |
|
 |
Ratchets-MetalFishingReel_8.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks And Clicks W Small Metal Jingling, V Slow | i |
2.0 | 0:10 | Construction | Ratchet Tool | ||
| 35 |
|
 |
EFX INT Small Drill Motor on Steel 03.wav | Tool: Tool, Interior, Drill Motor Rubbing Against Small Metal Plate Less Overtones, Sweetener For Multi Barrel Gatling Gun | i |
2.0 | 0:05 | Construction | Drill | ||
| 36 |
|
 |
Tools-MetalScissors-Int-_15.wav | Tools - Metal Scissors - Int - CU - Hard Snip, Rough Open Of Blades | i |
1.0 | 0:01 | Construction | Scissors | ||
| 37 |
|
 |
Tools-HandPoweredStapleGu_4.wav | Tools - Hand Powered Staple Gun - Int - C U - Springy Metal Clang | i |
2.0 | 0:01 | Construction | Staple Gun | ||
| 38 |
|
 |
Ratchets-PlasticDAMQuickF_1.wav | Ratchets - Plastic DAM Quick Fishing Reel - CU - High Pitched Reeling, Spinning, And Clicking, Medium-Slow | i |
2.0 | 0:11 | Construction | Ratchet Tool | ||
| 39 |
|
 |
ArcWelding.BBC.ECD43b.wav | Construction, Arc Welding: Arc Welding Machine, Switch On, Weld, Lose Arc, Restrike, Weld, Off. | i |
2.0 | 0:54 | Construction | Construction Arc Welding | ||
| 40 |
|
 |
Tools-MetalTools-Int-Clo_12.wav | Tools - Metal Tools - Int - Close-Up - Series Of Medium Loud Impacts And Scraping, High-Pitched | i |
1.0 | 0:01 | Construction | Tool | ||
| 41 |
|
 |
Tools-HedgeClippers-CU-Fast.wav | Tools - Hedge Clippers - CU - Fast And Hard Snips W Light Branch Movement | i |
2.0 | 0:02 | Construction | Hedge Clippers | ||
| 42 |
|
 |
DrillsIndustrial.BBC.EC57M.wav | Construction, Drill: Sheet Metal Engineering, Sheet Metal Being Drilled, Continuous Sound. | i |
2.0 | 1:10 | Construction | Construction Drill | ||
| 43 |
|
 |
Tools-NailAirGun-Close-U_15.wav | Tools - Nail Air Gun - Close-Up - Pneumatic, Single Dull Click With Hissing Air Burst | i |
2.0 | 0:01 | Construction | Nail Gun | ||
| 44 |
|
 |
Tools-2PointedMetalBladeS_1.wav | Tools - 2 Pointed Metal Blade Scissors - CU - Light Snips W Pressure On Blades | i |
2.0 | 0:03 | Construction | Scissors | ||
| 45 |
|
 |
Ratchets-LargeRatchets-M_29.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Metal Groan And Moan | i |
2.0 | 0:04 | Construction | Ratchet Tool | ||
| 46 |
|
 |
Tools-Round-TippedMetalBl_4.wav | Tools - Round-Tipped Metal Blade Scissors - CU - Light, Medium-Slow Snips | i |
2.0 | 0:03 | Construction | Scissors | ||
| 47 |
|
 |
Ratchets-LargeRatchets-Me_9.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Clunk To Stop | i |
2.0 | 0:01 | Construction | Ratchet Tool | ||
| 48 |
|
 |
Ratchets-MetalFishingRee_13.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks And Clicks, Slow | i |
2.0 | 0:05 | Construction | Ratchet Tool | ||
| 49 |
|
 |
Tools-HandHeld-HedgeShea_10.wav | Tools - Hand Held - Hedge Shears - MCU - Big Opening And Hard Close W Clack, Various | i |
2.0 | 0:02 | Construction | Hedge Clippers | ||
| 50 |
|
 |
Ratchets-MetalFishingReel_3.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks And Clicks W Small Metal Jingling, V Slow | i |
2.0 | 0:05 | Construction | Ratchet Tool | ||
| 51 |
|
 |
EFX INT Small Drill Motor on Metal 02.wav | Tool: Tool, Interior, Drill Motor Rubbing Against Small Metal Plate Less Overtones, Sweetener For Multi Barrel Gatling Gun | i |
2.0 | 0:04 | Construction | Drill | ||
| 52 |
|
 |
Tools-MetalScissors-Int-_10.wav | Tools - Metal Scissors - Int - CU - Hard Snip Through Cloth, Blades Open | i |
2.0 | 0:01 | Construction | Scissors | ||
| 53 |
|
 |
Tools-HandHeld-HedgeShear_9.wav | Tools - Hand Held - Hedge Shears - CU - Hard, Fast And Scrapey Sounding Open And Close, Various | i |
2.0 | 0:03 | Construction | Hedge Clippers | ||
| 54 |
|
 |
Ratchets-PlasticDAMQuick_22.wav | Ratchets - Plastic DAM Quick Fishing Reel - CU - High Pitched Reeling, Spinning, And Clicking, Medium-Slow | i |
2.0 | 0:02 | Construction | Ratchet Tool | ||
| 55 |
|
 |
AcetyleneTorches.BBC.EC57L.wav | Construction, Acetylene Torches: Sheet Metal Engineering, Sheet Metal Cut By An Oxy-acetylene Torch. (Bangs At Start.) | i |
2.0 | 1:31 | Construction | Construction Acetylene Torches | ||
| 56 |
|
 |
Tools-MetalShovelScrapes-_1.wav | Tools - Metal Shovel Scrapes - C U - A Series Of Forceful Shovel Scrapes On A Hard Surface, Some Large Debris Clatter | i |
1.0 | 0:18 | Construction | Shovel | ||
| 57 |
|
 |
Tools-HandTools-SledgeHam_8.wav | Tools - Hand Tools - Sledge Hammer - Int - CU - Hit To Concrete Or Cement | i |
2.0 | 0:02 | Construction | Hammer Sledge Hammer | ||
| 58 |
|
 |
Drills.BBC.ECD43d.wav | Construction, Drill: Hand-drill, Single Hole In Wood. | i |
2.0 | 0:11 | Construction | Construction Drill | ||
| 59 |
|
 |
Tools-NailAirGun-Close-U_10.wav | Tools - Nail Air Gun - Close-Up - Pneumatic, Single, Dull Thud With Hissing Air Burst | i |
2.0 | 0:01 | Construction | Nail Gun | ||
| 60 |
|
 |
Tools-HedgeClippers-CU-Shor.wav | Tools - Hedge Clippers - CU - Short, Medium-Hard Snips | i |
2.0 | 0:05 | Construction | Hedge Clippers | ||
| 61 |
|
 |
Ratchets-SteelCableWinch-_8.wav | Ratchets - Steel Cable Winch - Ext - CU - Metal, Quick Wind Up, Fast Spin Release | i |
2.0 | 0:04 | Construction | Ratchet Tool | ||
| 62 |
|
 |
Tools-PaintBrush-Int-CU-_10.wav | Tools - Paint Brush - Int - CU - Wet Cloth Splat | i |
2.0 | 0:06 | Construction | Paint Brush | ||
| 63 |
|
 |
Tools-Air-PoweredScrewdr_13.wav | Tools - Air-Powered Screwdriver - Int - CU - Steady Drilling | i |
2.0 | 0:08 | Construction | Screwdriver Air Powered | ||
| 64 |
|
 |
Tools-AutoMechanicsServi_12.wav | Tools - Auto Mechanics Service Station Activity - Int - Doors Open - Pneumatic Air Wrench, Air Compressor Motors, Tire Changing Machine, MCU Car Starts Revving Midway | i |
2.0 | 0:09 | Construction | Tool | ||
| 65 |
|
 |
Ratchets-Handcuffs-Moveme_5.wav | Ratchets - Handcuffs - Movement - Int - CU - Small Cuff Movements | i |
1.0 | 0:01 | Construction | Ratchet Tool | ||
| 66 |
|
 |
Ratchets-PlasticDAMQuick_17.wav | Ratchets - Plastic DAM Quick Fishing Reel - CU - High Pitched Reeling, Spinning, And Clicking, Slow | i |
2.0 | 0:01 | Construction | Ratchet Tool | ||
| 67 |
|
 |
AcetyleneTorches.BBC.ECD158.wav | Construction, Acetylene Torches: Cutting Steel Girder With Oxy-acetylene Torch. | i |
2.0 | 1:47 | Construction | Construction Acetylene Torches | ||
| 68 |
|
 |
Tools-MetalScissors-Int-C_6.wav | Tools - Metal Scissors - Int - CU - Short, High Pitched Snip Through Cloth | i |
2.0 | 0:01 | Construction | Scissors | ||
| 69 |
|
 |
Tools-HandTools-SledgeHam_3.wav | Tools - Hand Tools - Sledge Hammer - Int - CU - Hit To Concrete Or Cement | i |
2.0 | 0:01 | Construction | Hammer Sledge Hammer | ||
| 70 |
|
 |
DrillsElectric.BBC.EC57K.wav | Construction, Drill: Electric Drill, Three Bursts. | i |
2.0 | 0:24 | Construction | Construction Drill | ||
| 71 |
|
 |
Tools-MitreSaw-Int-CU-Saw_4.wav | Tools - Mitre Saw - Int - CU - Sawing Ice, Scrapes And Light Screeches | i |
2.0 | 0:04 | Construction | Saw Mitre Saw | ||
| 72 |
|
 |
Tools-HedgeClippers-CU-Medi.wav | Tools - Hedge Clippers - CU - Medium-Hard Snips W Random Pace | i |
2.0 | 0:06 | Construction | Hedge Clippers | ||
| 73 |
|
 |
Ratchets-SteelCableWinch-_3.wav | Ratchets - Steel Cable Winch - Ext - CU - Metal, Medium Speed Wind Up, Fast Spin Release | i |
2.0 | 0:04 | Construction | Ratchet Tool | ||
| 74 |
|
 |
Tools-NailAirGun-Close-Up_9.wav | Tools - Nail Air Gun - Close-Up - Pneumatic, Single, Dull Thud With Hissing Air Burst | i |
2.0 | 0:01 | Construction | Nail Gun | ||
| 75 |
|
 |
Tools-Air-PoweredLathe-In_9.wav | Tools - Air-Powered Lathe - Int - CU - Motor Start, Steady, And Wind-Down, Fast | i |
2.0 | 0:21 | Construction | Lathe | ||
| 76 |
|
 |
Tools-ArcWelder-Int-CU-Shor.wav | Tools - Arc Welder- Int - CU - Short Spurts | i |
2.0 | 0:20 | Construction | Construction Arc Welding | ||
| 77 |
|
 |
Tools-Chainsaw-Exterior-Med.wav | Tools - Chainsaw - Exterior - Medium - Chainsaw Starts And Is Revvin' For Action, Recording Stops Very Abruptly | i |
2.0 | 0:18 | Construction | Chainsaw | ||
| 78 |
|
 |
Ratchets-Handcuffs-CloseTig.wav | Ratchets - Handcuffs - Close Tighten - Int - CU - Quick, Snappy | i |
1.0 | 0:01 | Construction | Ratchet Tool | ||
| 79 |
|
 |
Ratchets-LargeRatchets-M_24.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Metal Groan And Moan | i |
2.0 | 0:03 | Construction | Ratchet Tool | ||
| 80 |
|
 |
Tools-PlasticHandledScissor.wav | Tools - Plastic Handled Scissors - CU - Slow Snips | i |
2.0 | 0:05 | Construction | Scissors | ||
| 81 |
|
 |
Ratchets-LargeRatchets-Me_4.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Clunk To Stop | i |
2.0 | 0:01 | Construction | Ratchet Tool | ||
| 82 |
|
 |
Ratchets-MetalDYLAFishin_25.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, Medium-Slow | i |
2.0 | 0:02 | Construction | Ratchet Tool | ||
| 83 |
|
 |
Ratchets-MetalDYLAFishing_9.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, Medium-Slow | i |
2.0 | 0:01 | Construction | Ratchet Tool | ||
| 84 |
|
 |
Tools-HandHeld-HedgeClipp_3.wav | Tools - Hand Held - Hedge Clippers - Int - MCU - Clipping Brush, Medium Speed, Various | i |
2.0 | 0:03 | Construction | Hedge Clippers | ||
| 85 |
|
 |
Ratchets-MetalFishingRee_40.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks And Clicks, Slow | i |
2.0 | 0:01 | Construction | Ratchet Tool | ||
| 86 |
|
 |
EFX INT Small Drill Motor on Iron 05.wav | Tool: Tool, Interior, Drill Motor Rubbing Against Small Metal Plate, Sweetener For Multi Barrel Gatling Gun | i |
2.0 | 0:02 | Construction | Drill | ||
| 87 |
|
 |
Tools-Lathe-Int-CU-MotorS_1.wav | Tools - Lathe - Int - CU - Motor Start, Idle, Wind-Down, And Off | i |
2.0 | 0:08 | Construction | Lathe | ||
| 88 |
|
 |
Tools-HandHeld-HedgeShear_4.wav | Tools - Hand Held - Hedge Shears - CU - Hard, Fast And Scrapey Sounding Open And Close, Various | i |
2.0 | 0:01 | Construction | Hedge Clippers | ||
| 89 |
|
 |
Ratchets-Handcuffs-CloseT_2.wav | Ratchets - Handcuffs - Close Tighten - Int - CU - Quick, Snappy | i |
1.0 | 0:01 | Construction | Ratchet Tool | ||
| 90 |
|
 |
Ratchets-LargeRatchets-M_19.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Clunk To Stop | i |
2.0 | 0:01 | Construction | Ratchet Tool | ||
| 91 |
|
 |
Tools-PlasticHandledSciss_2.wav | Tools - Plastic Handled Scissors - CU - Medium-Slow Snips | i |
2.0 | 0:05 | Construction | Scissors | ||
| 92 |
|
 |
Ratchets-LargeRatchets-M_51.wav | Ratchets - Large Ratchets - Metal Gear Clanks - Int - MCU - Big Ratchet Turning, Reverb, Constant Motion W No Start Or Stop, Variations In Speed As If Hand Cranked, Fairly Bright | i |
2.0 | 0:26 | Construction | Ratchet Tool | ||
| 93 |
|
 |
Tools-Spring-LoadedGrass_5.wav | Tools - Spring-Loaded Grass And Weed Shears - MCU - Medium-Slow Snipping W Varied Pace | i |
2.0 | 0:12 | Construction | Hedge Clippers | ||
| 94 |
|
 |
Ratchets-MetalDYLAFishin_20.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, V Slow | i |
2.0 | 0:07 | Construction | Ratchet Tool | ||
| 95 |
|
 |
Ratchets-MetalDYLAFishing_4.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, Medium-Slow | i |
2.0 | 0:06 | Construction | Ratchet Tool | ||
| 96 |
|
 |
Tools-HammeringWood-Int-C_1.wav | Tools - Hammering Wood - Int - Close-Up - Medium Hard Burst | i |
1.0 | 0:02 | Construction | Hammer | ||
| 97 |
|
 |
Ratchets-MetalFishingRee_35.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks And Clicks, Slow | i |
2.0 | 0:07 | Construction | Ratchet Tool | ||
| 98 |
|
 |
EFX INT Small Drill Motor 03.wav | Tool: Tool, Interior, Drill Motor Fast Start And Force Stop, Sweetener For Multi Barrel Gatling Gun | i |
2.0 | 0:16 | Construction | Drill | ||
| 99 |
|
 |
Tools-Jackhammer-Ext-MCU-_4.wav | Tools - Jackhammer - Ext - MCU - Jackhammering Concrete, Long Strand | i |
2.0 | 0:44 | Construction | Hammer Jackhammer | ||
| 100 |
|
 |
Tools-HandHeld-HedgeShea_32.wav | Tools - Hand Held - Hedge Shears - MCU - Fast, Hard Open And Close W Clack, Various | i |
2.0 | 0:03 | Construction | Hedge Clippers |